Friday, August 5, 2011
Posted by Shawn Rogers in "Apple iPhone, iPod Touch, iPad" @ 07:00 AM
So How Does It Really Work?
The use of the keyboard and the stand is really straight forward. Zagg included a very basic guide to help you get the keyboard paired with your iPad. Its just a matter of turning the keyboard on, hitting the connect button, and then going into your settings on your iPad 2, turning on Bluetooth and choosing the keyboard from the list of displayed USB devices. Your iPad 2 will display a number: type this number into your keyboard and hit enter, and now your iPad 2 is paired with your keyboard. You only have to do this once; afterwards your iPad 2 will automatically connect to the keyboard any time Bluetooth is enabled and the keyboard is on and within reach.
To use the stand, just flip up the plastic flap and then pull out the base and slide it into the slot. You then slide your iPad 2, in whichever orientation you want, into the canyon that runs along the length of the case.
I found setting up the stand was quite easy and, thanks to a lip running along the canyon, the iPad 2 stays in place quite well. You should have no fear of your iPad slipping loose if you move the keyboard to a new location, or if you're using it on an airplane and you hit turbulence.
The keyboard is a bit cramped, but otherwise works just like it should. The addition of the arrow keys makes it really easy to position your cursor where you need it in a document, and the shortcut buttons allow you to switch programs and perform basic functions without needing to take your hands off the keys to touch the screen. Writing long emails has been a breeze and is a welcome change from using the on-screen keyboard.
As noted earlier, it also doubles as a case for when you are not using the keyboard. You simply lay the stand down flat, and then place your iPad 2 in screen first. It's a very snug fit, with the aluminum shell being contoured for a near perfect fit. There's a slim line of foam that runs around the case; this serves to prevent aluminum on aluminum contact, and the foam provides a very snug fit so your iPad 2 doesn't slip out by accident. Its very easy to put your iPad 2 in place, however it does take a bit of effort and finesse to pull it back out. Zagg/Logitech are nice enough to include instructions with graphics on the best way to remove the iPad 2 from the case. Personally, I rather like the snug fit, and would rather deal with a little extra effort in removing the iPad 2 than worry my iPad might fall out at the wrong time.
Room For Improvement
I like the Logitech Keyboard Case by ZAGG for iPad 2. It has helped dramatically increase my productivity when using my iPad 2 for business, and has helped make my iPad 2 a true replacement for my laptop on most business trips. However, before you run out and buy one, there's a few things you need to consider.
First, the keyboard itself is very small. I have rather small hands, and even I found it to be slightly cramped and took quite a bit of time before I could type with any speed comfortably. Those of you with large hands or thick fingers may find the keys are just too small for you to be able to comfortably use.
In addition, I have some questions about the long term durability of the product. One thing I noticed as I took the Keyboard Case out of the packaging was the foam in the corners had already started to separate from the aluminum. This foam is needed for a snug fit and to prevent wear and tear on your iPad's body. If the foam is already starting to separate before it has even been used once, how long until it comes off entirely? I also have some concerns with the stand since it is made out of rather rigid plastic, and needs to be bent quite a bit every time you open and close the stand. Past experience with similar designs makes me wonder how long it will be until the plastic tears at the joint, or until the little tabs that help hold it in place when open snap off.
Finally, what is probably the biggest drawback is that using the Zaggmate as a case leaves a lot to be desired. To begin with, your iPad 2 will only fit when placed screen down. This means if you actually plan to use your iPad 2, you must remove it from the case. I had hoped I could use the case for protection when using my iPad 2 in my hand, but that is not possible. The other big problem is the case only covers the front and sides of your iPad 2. The back of your iPad is not only left uncovered, but the sides project out above the protection of the aluminium sides of the case. Because of the snug fit of the case, you can't combine the Logitech Keyboard Case by ZAGG for iPad 2 with a 3rd party snap on plastic or silicone case that would offer protection to the back of your iPad 2. Instead, you'll need to purchase a very thin skin if you want to protect the back of your iPad 2 from scratches and other wear.
Figure 1: As you can see the Zagg Keyboard case leave the back and the sides of the iPad 2 exposed.
The Logitech Keyboard Case by ZAGG for iPad 2 is a solidly built product that does 2 of the 3 things it claims to do very well (provided you don't have large hands) and does it in a very portable form factor. However if you want a case that offers all-over protection or you need a larger keyboard, you will want to look elsewhere and consider going with a two piece solution of a case/stand combo and a stand-alone USB keyboard. For those with smaller hands and who don't mind exposing the back of your iPad 2, you should definitely consider the Logitech Keyboard Case by ZAGG for iPad 2.
Shawn Rogers is a self-described gadget geek and has spent the last two decades working in technology sales and manufacturing. His thoughts and insights have appeared in numerous industry publications as well as Business Week. He lives in Orange County, California and enjoys spending time at the beach with his technology disinterested wife, and two dogs.
Do you enjoy using new hardware, software and accessories, then sharing your experience with others? Then join us on the Thoughts Media Review Team! We're looking for individuals who find it fun to test new gear and give their honest opinions about the experience. It's a volunteer role with some great perks. Interested? Then click here for more information.